Samsung INR18650-35E 3500mAh (Pink) - Druckversion +- DIYAKKU | Do It Yourself Akku (https://diyakku.de) +-- Forum: Diskussionen (https://diyakku.de/forumdisplay.php?fid=6) +--- Forum: Lithium Ionen Akkus (https://diyakku.de/forumdisplay.php?fid=26) +---- Forum: 18650 (https://diyakku.de/forumdisplay.php?fid=32) +---- Thema: Samsung INR18650-35E 3500mAh (Pink) (/showthread.php?tid=23)

Samsung INR18650-35E 3500mAh (Pink) - DIYAKKU - 06-10-2022 Official specifications: Nominal capacity: 3500mAh Minimum capacity: 3350mAh Nominal voltage: 3,6V - 3,7V Charging voltage: 4,2V Discharge current: 8A Maximum discharge current: 13A Charge current: 0,6C 2000mA Discharge end voltage: 2,65V Pluspol: FlatTop Chemistry: LiNiCoAlO2 Diameter: 18,55mm ± 0,1 Height: 65,25mm ± 0,15 Weight: 48g ± 1 This is one of the new high capacity cells. The discharge curves has good tracking. At 15A the B track stops just after 2.3Ah, this is because my battery holder melts (I hope this is fixed now). 15A is definitly too high current for this cell. The cell temperature is above 75°C (25°C ambient + 50°C temperature raise). Logfile says 87°C for A cell. On this chart it is obvious how the heat improves the performance at 15A. Due to the melted battery holder I did only do this for one cell. Conclusion The cell looks very good, it has lot of capacity and can handle some current, but I will not recommend it above 10A. Notes and links How is the test done and how to read the charts How is a protected LiIon battery constructed More about button top and flat top batteries Compare to 18650 and other batteries